Dieselcraft  - Diesel Performance Products - #1 in Oil and Fuel Cleaning Technology
| | Follow Us:

Waste Oil Recovery and Purification Systems

The Fuel Factory and Oil Reclaim System.
Waste Oil Recovery and Purification Systems

The Fuel Factory is a set of precision centrifuges driven by an industrial duty gear pump that can run continuous for 24 hours with out a problem and will clean 216 gallons of waste oil per hour. The Fuel Factory will clean any waste motor oil, transmission fluid, hydraulic fluid or vegetable oil without any filters. Also will clean dirty diesel fuel.

Will separate any solid from the liquid and will also remove water.

The Fuel Factory is built on a precision inch aluminum plate that hold the two centrifuges, pump, motor, switch and the easy pour 12" pour opening. The plate is then powder coated.

The Fuel Factory is designed to fit inside and just below the top edge of a standard 55gallon open top drum. By being below the top inch there are NO SPILLS on the ground. Everything goes in the Fuel Factory.

The Fuel Factory is easily removed from the drum if needed.

Process the oil in one drum then use the same pump to transfer the finished product to a storage tank.

* Time depends on oil temperature and time it take to heat to operation temperature of 160-180F





Dieselcraft's Black Diesel and WVO Fuel Factory

Cleaning rate is 216 gallons per hour

Includes:

  • 2 each Dieselcraft OC-50 High Speed Centrifuges.
  • 1/2 HP pump 120 volt standard or 120/240 50/60 HZ optional
  • 2 each 1000 watt  120 volt drum heaters 
  • 100 mesh suction strainer and wand
  • 2 each pour through 200 micron strainers for easy filling.
  • In kit form. Assembly required.
  • Drum is not included
All prices are for US domestic sales only. Export sales are subject to all shipping, duty and VAT fees in the destination country
Item Price Buy Now
Fuel Factory 2011.1
$3195.00  

Consult your local dealer for delivery information.

 
Dieselcraft OPS-50 Oil Processing System

Dieselcraft OPS-50x2 Oil Processing System

Cleaning rate: 216 gallons per hour
Measures 13" wide by 42" tall and 24" deep to stand next to a 55 gallon drum
Shipping weight: 100 pounds
System holding capacity: 40 oz of contamination

Pump Features: 100 PSI maximum continuous pressure, all-bronze construction, bronze gears with stainless steel shafts.

Motor Features: 1/2 hp US manufactured electric motor, 115/230V-60Hz-1 phase, 1750 rpm.

Frame is a 12 gauge steel fully formed structure and polyester powder coating.

Includes 2 each 1000 watt band heater.

All prices are for US domestic sales only. Export sales are subject to all shipping, duty and VAT fees in the destination country
Item Price Buy Now
Model OPS-50x2 Oil Processing System $3195.00  

Consult your local dealer for delivery information.

 
| | Follow Us:
Home | Engine Oil Cleaning | Centrifuge Videos | Waste Vegetable Oil Cleaning | Waste Oil Cleaning Systems | Continuous Flow Centrifuge
Portable Diesel Fuel Polishing Units | Automated Diesel Fuel Cleaning | Diesel Fuel Purification Systems
Biocides | Fuel Conditioners | Fuel Microbe Test Kits | Fuel Water Sensor | Sludge Dispersant | Contact Us
Acera Technologies - Websites Helping You Reach the Four Corners of the Globe!