Patent Pending
CARB #D-559

 

 

 

Dieselcraft Stabilizer Specs

Maximum Operating Temperature 350oF

Model 5-29
For engines with ¼ and 3/8 inch fuel lines and or for systems with fuel pump flow rates of 5 TO 29 GPH.
Inlet port size ¼ NPT.
Measures 3.5" square by 1.5" thick

Model 30-200
For engines with ½ inch fuel lines and or for systems with fuel pump flow rates of 30 TO 200 GPH. Inlet port size ½ NPT
*For 3/8 NPT line a bushing will be required.
Measures 4" square by 1.75" thick

Model 200-350
For engines with ¾ inch fuel lines and or for systems with fuel pump flow rates of 200 TO 350 GPH.
Inlet port size ¾ NPT
Measures 4.75" square by 2" thick

Model 350-500
For engines with 1 inch fuel lines
and or for systems with fuel pump flow rates of 350 TO 500 GPH.
Inlet port size 1" NPT (5.5" square by 2.25 thick)
For 3/4 NPT line a bushing will be required

Model 500-900
For engines with 1inch fuel lines and or for systems with fuel pump flow rates of 350 to 500 GPH.
Inlet port size 1 inch NPT.
Measures 5.5" square by 3.00 thick

Model 900-1500
For engines with 1inch fuel lines and or for systems with fuel pump flow rates of 900 to 1500 GPH.
Inlet port size 1 ½ inch NPT.
Measures 8.75 " square by 3.5 thick

Model 1500-2500
For engines with 1inch fuel lines and or for systems with fuel pump flow rates of 1500 to 2500 GPH.
Inlet port size 2 inch NPT.
Measures 8.75" square by 4.5 thick

Simple installation

The unit is to be mounted between the fuel tank and the inlet side of the injector pump as close to the engine as possible. In most cases a simple splice into the fuel line or direct connect to the fuel filter can be achieved.

All Dieselcraft units come with a universal mounting bracket and instructions.

It works as you run the engine.

No maintenance required

Made in USA

Product Specifications | Installation Info | Contact Us