Benefits
Biobor® JF is a liquid fuel additive that combats
fungus and other microtive life in hydrocarbon fuels, such as
diesel and jet fuels, but is also effective in light oils and
transmission fluid. Biobor® JF eliminates growth of
harmful slime-producing fungi that clog filters and pipelines,
attack rubber fuel system components and whose waste products
aid in the corrosion of metal surfaces. Biobor® JF is
simple to use and harmless to the wide variety of fuel system
parts, top coatings, sealants and elastomeric materials
tested. It does not adversely affect fuel performance in
engines. Biobor® JF is an effective microbiocide
because of its equilibrium solubility in both fuel and water
under conditions of fuel storage.
Applications
Biobor® JF is used by a large number of aircraft
manufacturers, airlines, marines, trucking fleets, railroads,
bulk storage terminals, fuel suppliers and by other users of
hydrocarbon fuels and oils exposed to the possibility of
contamination by fungus and bacteria.
Treatment Procedures
If a system is badly contaminated, drain water bottoms. Water
bottoms in storage tanks should be kept to a minimum. Good
housekeeping is important in treating slime problems, but it
is not a cure. Biobor® JF is used at 270 ppm in fuel to
effect sterilization, and subsequently at 135 ppm to maintain
fungus-free fuel. Ideally, Biobor® JF should be
metered. However, in the absence of metering equipment,
Biobor® JF may be manually batch-blended. If
batch-blended, as in tank trucks or small aircraft wing tanks,
Biobor® JF should be introduced while the tank is being
filled and after the tank is approximately ½ full. This will
ensure faster and more complete dispersion.
Container Sizes and Dosage
Rates
Biobor® JF is available in 8 oz, and 16 oz. Easy
Squeeze containers, designed to dispense the exact measure
every time, along with one quart cans, 5 gal. pails and 55
gal. drums.
To
calculate the number of ounces of
Biobor® JF
needed for diesel fuel only multiply YOUR
gallons of fuel x 7.08 and then x .004 for initial treatment
then x .002 for maintenance treatments. Example 100 gallons of
fuel x 7.08=708 x .004=2.83 ounces are needed for
initial shock treatment then half of that there after to
maintain the tank.
Storage and Handling
All Biobor® JF containers must be kept closed from the
atmosphere. Protect Biobor® JF from any water
contamination. Biobor® JF is classified as a flammable
and is shipped as a FLAMMABLE LIQUID N.O.S. (NAPHTHA) UN 1993,
Class 3.3, PG III
Sold in full case quantities
only.
12 each 8 ounce bottles
treats 6600 gallons of fuel
$219 delivered
