California Air Resources Board Executive Order # D-559, D-559-1 and D-559-
Product Specifications | Installation Info | Contact Us
 Product Brochure

Standard Duty
Model 2006-1
Fuel Purifier

For diesel pickup trucks, farm equipment,
small boats and generators
with 1/4 and 5/16 fuel lines

 

This "Fuel Purifier" is based on surface tension principle and rotational fluid motion also known as “Cyclone Separation”

Since diesel and water have different surface tension as well as density, when a mixture of diesel and water is spread over a large area water droplets and large solids will separate from the fuel. 

The clean fuel is drawn out of the unit and into the primary fuel filter of your system. Water and contamination is drained from the bottom of the unit. This process continues as long as the engine fuel pump is operating.

Optional water sensor. The Sending unit is dual voltage, 12 or 24 volt DC. The probe is 1/8 "NPT. The probe will detect the difference between fuel and water . If water is in the fuel the indicator light be on. The mounting bracket contains a panel that instructs you to open the valve and remove the water. When the water is removed the light will go off.

Standard Duty
Model 2006-1
Fuel Purifier with 5-29 Stabilizer.
Complete System

A compete fuel polishing system to remove water, reduce sludge and improve engine performance.

Comes with all needed mounting hardware and hoses.

Order on line Model 2006-1/ 5-29 Complete System $374.00

Order on line Model 2006-1 Fuel Purifier Only $199

Order online Model 5-29 Fuel Stabilizer Only $175

Model 2006-2

Diesel Fuel Purifier for Class 8 Trucks, Construction Equipment, Boats
and Gen-Sets

 

“Cyclone Separation”

 

·         Removes over 90% of the water and the natural contaminates.

 

·         No moving parts, no elements to clean and dispose of, only purging the water and particulates.

 

·         For engines with ˝ fuel lines and or LESS THAN 875 HP

 

·         Epoxy powder coated.

 

·         Comes with all needed mounting hardware, hoses and stainless steel mounting plate.

 

·         The unit is 4 inches in diameter and 11 inches over all in height.

 

·          Includes a port for the optional water sensor Part # 06-5

 

    Order on line Model 2006-2  Fuel Purifier for $299.00

Order on line Model 30-200 Fuel Stabilizer for $262

Made in USA
Dieselcraft is a trade mark of The Magnum Group LLC

Non-Additive Fuel Technology
is a trade mark of Dieselcraft Fluid Engineering

The Executive Order or the exemption it provides is not an endorsement or approval of any emissions reduction claims for the Fuel Stabilizer, and is only a finding that the device is exempt from the prohibitions of Vehicle Code Section 27156

Product Specifications | Installation Info | Contact Us
 Product Brochure